TAJBank USSD Code (*898#): One String Confirmed, Blog Strings at War

The TAJBank USSD code, *898#, opens the bank’s phone menu with no data. The bank names that string and nothing after it, while blogs swap block, unblock and loan numbers, sometimes inside a single article, so here is what is confirmed, what is only reported and how to stay safe.

Last verified: against the bank’s own website. Page editor: , banking professional with over 10 years of experience. Not affiliated with TAJBank.

How to use the TAJBank USSD code (*898#) step by step

  1. Use the phone whose number TAJBank has on file for your account.
  2. Dial *898# and give the first screen a moment to load.
  3. If the line has never used USSD, choose the registration item. Guides mention a PIN of four digits, one says five, and the bank prints no screens of its own.
  4. Check your balance once, so you know the profile works.
  5. Run every other job from the menu until a shortcut has proved itself on your own line.
Worked example: a grain dealer at Kantin Kwari market in Kano needs to pay a supplier. He dials *898#, opens transfers, types the amount and the ten-digit account number, then reads the name on screen. Legit.ng prints the amount first, *898*20000*0123456789#, while Silicon Africa prints the account first, so he trusts the screen rather than either guide.

TAJBank USSD code: the one string the bank prints

The first answer on the bank’s FAQ page says a savings account can be opened at a branch, through the TAJWay app or by dialling *898#. Its digital banking page names TAJWay and lists USSD only as a way to fund the account inside the app, with no string beside it. The security page says nothing about USSD.

The one code the bank prints, checked 8 November 2026
TaskCode
Opens the TAJBank phone menu and, per the FAQ, opens a savings account*898#
Official gap: the FAQ page shows a 26 February 2023 edit date and the other pages carry a 2023 footer. None gives a table of strings, a limit, a fee, a PIN rule or a block string for *898#.

Reported TAJBank USSD code strings: not confirmed by the bank

Every row below comes from a blog. The last column names the writers and shows where they contradict each other. No Copy or Dial buttons appear here on purpose.

TAJBank strings from guides, with the clashes marked
TaskString reportedWho prints it
Open an account*898*1#Kashgain only; Silicon Africa, TeezabTech and Dynablog give *898*1# a loan job, and the bank’s FAQ says to dial plain *898#
Check balance*898*0#Silicon Africa, TeezabTech and Dynablog; Legit.ng and Silicon Africa’s own FAQ send you to the menu and the PIN instead
Send money, account number first*898*AccountNumber*Amount#Silicon Africa, TeezabTech and Dynablog; Dynablog calls it a TAJBank-to-TAJBank string while Silicon Africa uses it for other banks
Send money, amount first*898*Amount*AccountNumber#Legit.ng, GenGuide and Kashgain; this is the opposite order to the row above
Airtime or data for your own line*898*Amount#Silicon Africa and GenGuide; GenGuide’s worked example dials *989*1000#, which looks like a slip
Airtime or data for another number*898*PhoneNumber*Amount#Silicon Africa and Dynablog; Dynablog prints one string for both airtime and data
Pay a biller*898*MerchantID*Amount#Silicon Africa (merchant ID) and Dynablog (biller ID); the bank names no billers
Loan*898*1# or *898*3#Silicon Africa, TeezabTech and Dynablog list *898*1#, yet the how-to sections of Silicon Africa and Dynablog say *898*3#
Block USSD*898*2# or *898*911#Silicon Africa, TeezabTech and Dynablog list *898*2#, while their step-by-step sections use *898*911#
Unblock USSD*898*3# or *898*912#The same writers list *898*3# in the table and use *898*912# in the steps, so *898*3# is both a loan and an unblock

Does TAJBank print a USSD code for this?

Pick a job. You get the menu route first, then what guides print, flagged as unconfirmed unless TAJBank itself says it.

—

—

TAJBank USSD code same-number lookup

The loudest clash is over short numbers after *898*. Choose one to see every job a guide gives it.

—

Your situation, the safest TAJBank USSD code step

Say what went wrong. You get the safest move from what the bank and the guides print.

—

Test a TAJBank USSD code you were sent

Got a string on WhatsApp that claims to be from TAJBank? Test it here before you press call. The checker also tells you whether a transfer string puts the amount or the account first, and a tidy result still is not approval.

—

TAJBank USSD code how-tos

Start on a clean SIM

  1. Pick up the handset whose number the bank holds for your account.
  2. Dial *898# and wait for the opening screen.
  3. Take the registration item if the line is new to USSD, and set the PIN the screen asks for.
  4. Open the balance item once, to prove the profile is live.
  5. Save *898# in your contacts under the bank’s name, so a look-alike number never reaches your PIN screen.

Pay a trader safely

Under *898#, open the transfer item, enter the amount and the ten-digit account number, then read the displayed name to the person you are paying. A mismatch means you stop and ask again.

Clear a wrong saved string

If your contacts hold *898*911# or *898*3# under the bank’s name, delete them. One may start a loan request and the other a block, depending on which guide you believe, and the bank confirms neither.

TAJBank USSD code charges and limits: what you can rely on

What *898# costs and allows: published and unpublished
ItemWhat we could confirm
Transfer limit by USSDNot published. The ₦10,000,000 ceiling on the digital banking page is for the TAJWay app
Airtime or data capNot published on the pages we read
Bank fee for USSDNot published; no guide cites a TAJBank page for a figure
Network session chargeBusinessDay puts the network charge for bank USSD at ₦6.98 per 120 seconds, taken from airtime; TAJBank has not said whether it covers *898#

Writers quote limits with no bank page behind them. Ask the bank for your own USSD ceiling before a big payment, and ask for it in writing.

Our analysis: where the TAJBank USSD code is documented, and where it is not

TAJBank’s own FAQ, modified on 26 February 2023, uses *898# for one job: opening a savings account by dialling it. That is the entry point, the one task that needs no existing registration. Everything beyond it is blog territory, and the blogs disagree, even within single articles, on loan, block and unblock numbers and on whether a transfer takes the account number or the amount first. The FAQ is now more than three and a half years old.

Our reading: The numbers TAJBank does print are app numbers: a ₦10,000,000 ceiling in the TAJWay app and a ₦1,075 card fee. The app ceiling is 100 times the ₦100,000 daily figure other banks print for USSD, so it must not be applied to *898#. TAJBank’s security page also says it makes no cold calls, so a caller who asks you to dial a string in its name is not the bank.

Why the TAJBank USSD code fails and how to recover

Why a session breaks

A shortcut did something you did not expect

Strings such as *898*1# and *898*3# carry two jobs each in the guides. Go back to *898# and work through the menu.

The amount and the account sit in the wrong order

Guides disagree on the order, so a string copied from one may fail on your phone. Use the menu, which asks for each item in turn.

The phone is not the registered one

Dial from the number the bank holds. After a SIM swap, ring a contact line or visit a branch to update it.

The session dropped halfway

Check your signal, wait a few minutes and try again. Do not repeat a payment until you have read the debit alert.

Money left your account and the other side shows nothing

Screenshot the alert and the last screen, and note the time, the amount and the recipient account. Email the lot to tajconnect@tajbank.com and ask for a reference number.

Still stuck? Take the TAJBank complaint to the CBN

Begin with the bank: ring a contact line, email tajconnect@tajbank.com or visit a branch, and keep each reference number. For a hacked or exposed account, the security page points to the Rapid Response Desk on 0800 567 8910 and tajbankhelpdesk@tajbank.com. When two weeks pass with no fair reply, write to cpd@cbn.gov.ng, the CBN Consumer Protection Department, and attach everything.

Safety rules for the TAJBank USSD code

  • TAJBank’s security page says the bank never makes cold calls asking for personal account details. Hang up on anyone who does.
  • Strings starting *21*, *61*, *62* or *67* redirect your calls and have nothing to do with banking.
  • Take support numbers from tajbank.com, never from a message that reached you first.
  • Missing handset? Phone the bank before anything else.

*898# or another TAJBank channel: which fits?

TAJBank channels side by side
ChannelGood forNote
*898#Basic jobs with no dataNo string table, limit or fee on the pages we read
TAJWay appAccount opening, card requests, statements, limit upgradesFingerprint, face or a 4-digit PIN; the bank prints app limits and a ₦1,075 card fee
Branches and contact linesBlocks, SIM swaps, disputesFour phone lines, one email and a Rapid Response Desk

About TAJBank and its *898# service

TAJBank Limited is a non-interest bank headquartered at Plot 72 Ahmadu Bello Way, Central Business District, Abuja, and its website shows registration number RC 1558365 and the line “Licensed by the Central Bank of Nigeria”. Wikipedia dates the start of business to 2 December 2019, and TechEconomy reported its national licence on 28 July 2022. TheCable reports that it met the ₦20bn national non-interest capital minimum ahead of the March 2026 deadline.

Key words, one line each

TAJWay
TAJBank’s mobile app, which opens accounts and carries its own limits.
Rapid Response Desk
The line the bank’s security page gives for compromised account details.
Non-interest bank
A bank that works under Islamic banking principles and pays no interest.
Session charge
The airtime the network deducts for each USSD session; BusinessDay puts it at ₦6.98.

How we sourced this guide

On 8 November 2026 we read three tajbank.com pages in full: the FAQ (modified 26 February 2023), digital banking and security (modified 29 July 2022). Only the FAQ names *898#. Silicon Africa (updated 9 January 2026), Dynablog (modified 25 December 2024), Legit.ng (16 July 2023), TeezabTech, GenGuide and Kashgain supply every reported string, TheCable the capital milestone and BusinessDay the network charge. No code was dialled on a phone, so open the bank’s site in a browser before relying on this page.

Common TAJBank USSD code questions

How do I dial the TAJBank USSD code?

It is *898#. The bank’s own FAQ page names it, and every guide we read gives the same main string.

Where does TAJBank print the *898# code?

In the first answer of its FAQ page, which tells customers they can open a savings account at a branch, in the TAJWay app or by dialling *898#. The page was last modified on 26 February 2023, and no TAJBank page we read lists sub-codes.

Can I open an account with the TAJBank USSD code?

The bank says yes: its FAQ names *898# as one of three ways to open a savings account. Silicon Africa says the service is for existing customers only, so follow the bank’s wording and expect the screens to guide you.

What is the TAJBank USSD code for balance?

Dial *898# and pick the balance item. Silicon Africa, TeezabTech and Dynablog print *898*0#, but TAJBank does not, so test it on your own line before you rely on it.

What is the TAJBank USSD transfer code?

The bank prints none. Silicon Africa, TeezabTech and Dynablog put the account number first, and Legit.ng, GenGuide and Kashgain put the amount first, so use the transfer item in the menu and read the account name before the PIN.

Which comes first in a TAJBank transfer string, the amount or the account number?

Guides split on this, and the bank settles nothing. The string checker on this page tells you which camp a pasted string belongs to, and still marks it as reported only.

What is the TAJBank USSD code to block or unblock the service?

TAJBank prints no block string. Two articles list *898*2# to block and *898*3# to unblock, then use *898*911# and *898*912# for the same jobs lower down, so call the bank instead of guessing.

Is *898*1# a TAJBank loan code or an account-opening code?

Three guides call it a loan string and Kashgain calls it account opening, while two of the loan guides also give the loan job to *898*3#. The bank names neither, so treat both as unconfirmed.

How do I buy airtime or data with the TAJBank USSD code?

Choose the airtime item under *898#. Guides print *898*Amount# for your own line and *898*PhoneNumber*Amount# for another number, but none of that comes from TAJBank, and an airtime top-up cannot be recalled.

How do I register for the TAJBank USSD code?

Dial *898# from the number linked to your account and follow the screens. Legit.ng and Kashgain mention a four-digit PIN, one Dynablog section says five digits, and its FAQ says debit card details, so let the screen tell you what it needs.

How do I reset my TAJBank USSD PIN?

TAJBank prints no USSD reset steps. Kashgain mentions a PIN management item in the menu, which is unconfirmed, and the TAJWay app has its own reset that does not change a USSD PIN. Call the bank or visit a branch.

What is the TAJBank USSD transfer limit?

None is published for *898#. The bank’s digital banking page says TAJWay limits can be raised to ₦10,000,000, and that figure belongs to the app, so ask before a large USSD payment.

Does the TAJBank USSD code cost money?

The bank prints no USSD fee. BusinessDay reports a ₦6.98 network charge per 120-second session on bank USSD, and we found no TAJBank statement on whether it applies to *898#.

Is TAJBank a licensed bank?

Yes. Its website says it is licensed by the CBN, TechEconomy reported its national licence on 28 July 2022, and TheCable reports that it met the ₦20bn national non-interest capital minimum before the March 2026 deadline.

Which TAJBank contact line should I use?

The bank prints +234 908 793 7417, +234 700 825 2265, +234 201 227 2906 and +234 708 069 8400, plus tajconnect@tajbank.com. Its Rapid Response Desk for compromised details is 0800 567 8910.

More guides that include TAJBank

  • Network codes: the NCC’s universal codes for airtime balance and data plans, which work whichever bank you use.
  • NIBSS *565 codes: check a BVN or track a transfer from any bank.
  • USSD glossary: plain meanings for the terms on this page.
  • Page history: when this page was last verified, and what has been corrected since.

After reading: three small jobs

Store *898# under the bank’s name, write the Rapid Response number on paper, and ask TAJBank for your USSD limit in writing.

Browse all banks Read the fraud warnings Sign up for change alerts