Network USSD codes in Nigeria: MTN, Airtel, Glo and T2

Network USSD codes are the short strings you dial to check airtime, buy data or borrow credit on MTN, Airtel, Glo and T2. Since 17 May 2023 the NCC has required every operator to use one list, so these network USSD codes work on any Nigerian SIM. This page prints that list, tracks the 2026 airtime-borrowing suspension network by network, and flags the dead codes that still get forwarded.

Last reviewed: . By , banking professional with over 10 years of experience. Code list from the NCC consumer portal; borrow status from press. No MTN, Airtel, Glo or T2 help page was read.

How network USSD codes work on MTN, Airtel, Glo and T2

Open your phone’s dialler, type the whole code including the star and the hash, then press call. A menu appears; reply with the number you want. The same network USSD codes now work on every Nigerian SIM because the NCC made all operators use one list. The Commission’s consumer portal says the aim was to stop subscribers memorising different codes per network, and that the old and new codes ran side by side only until 17 May 2023.

A network code is not a bank code. Network codes manage your SIM: balance, data, borrowing, sharing. Your bank’s code, such as the ones on our all-banks page, manages your account. The two lists never overlap, and a network code never needs your bank PIN.

The 13 network USSD codes the NCC approved

The regulator published the list on 7 June 2023, citing over 223 million active lines. We read the table in full on 9 November 2026. It prints every code as a bare number, so the star-and-hash forms below come from the NCC’s own example for *310# and from press and operator messages. Where a row says so, that part is reported rather than printed by the NCC. Read the original on the NCC consumer portal.

Harmonised short codes for all Nigerian mobile networks, checked 9 November 2026
ServiceCodeWhat it doesSource
Call centre or help desk300Printed bare by the NCC; press lists it as the call-centre line.NCC table
Voice mail deposit301Printed bare by the NCC, with no star or hash.NCC table
Voice mail retrieval302Printed bare by the NCC, with no star or hash.NCC table
Borrow service (airtime or data)*303#Opens the lending menu if your network is offering it. See the 2026 timeline below.NCC table (303); star and hash from press and MTN’s customer SMS
Stop a service*305#Press describes it as the way to stop a value-added service.NCC table (305); star and hash from press
Check balance*310#Airtime balance. The NCC’s own text uses *310# as its example.NCC table and NCC text
Credit recharge*311#Opens the recharge prompt. Guides print a *311*PIN# shape, which the NCC does not list.NCC table (311); star and hash from press
Data plan*312#Opens the data bundle menu. Plan sub-menus differ by network and are not covered here.NCC table (312); star and hash from press
Share airtime or data*321#Opens the share menu. Older network-specific transfer strings are in the old-codes table.NCC table (321); star and hash from press
Data plan balance*323#Shows what is left of your data bundle.NCC table (323); star and hash from press
Retained Do-Not-Disturb (DND)2442Printed bare by the NCC. We do not state how to use it because the NCC table does not.NCC table
Mobile number portability (MNP)3232Printed bare by the NCC. Same limit as the DND row.NCC table
Verify SIM registration and NIN-SIM linkage*996#Checks whether your NIN is linked to the SIM.NCC table (996); star and hash from press
Official gap: the NCC prints no strings with a number in the middle, such as *303*100# or *311*PIN#. Those come from guides. Use the menu when you can.

Network USSD codes: pick a job and your network

Choose what you want to do and which network your SIM is on. You get the harmonised code, with a status line for borrowing because that is where networks differ.

—

Network USSD codes for borrowing: the 2026 suspension, dated

The borrow code *303# is on the NCC list, yet in April 2026 all four operators switched the service off. The table gives each step with its source, and the dates differ across sources where noted. Nairametrics’ report of 22 April 2026 is the best single account of the start.

Airtime and data lending in 2026, from press reports
WhenWhat happenedSource
5 January 2026End of the extended window for operators to comply with the FCCPC’s digital lending rules (DEON Regulations 2025). The FCCPC says compliance steps were still incomplete.Brand Communicator, 24 Apr 2026, quoting the FCCPC
2 April 2026The FCCPC issues an enforcement directive demanding immediate compliance.Vanguard explainer, June 2026
Mid-April 2026MTN and Airtel announce a temporary suspension of airtime and data credit. Nairametrics’ checks found Glo and T2 had also stopped. The FCCPC says it did not ban the service.Nairametrics, 17 and 22 Apr 2026
14 or 15 April 2026A Lagos Federal High Court interim order restrains the FCCPC from enforcing DEON against the plaintiff’s members. The two sources give different days.Brand Communicator; Guardian (ALTON statement)
22 May 2026The FCCPC suspends DEON enforcement while the case continues.Techpoint; Vanguard
25 May 2026Airtel and Glo restore airtime lending after about six weeks. MTN has not.BusinessDay, 25 May 2026; Legit.ng
8 July 2026MTN restores XtraTime and texts customers that it is back, with the *303# code.Pulse, 8 Jul 2026
20 July 2026The FCCPC says the court dismissed the plaintiff’s suit and discharged the interim order, so the regulations can be enforced again. Legit.ng says operators may be affected.Legit.ng, 21 Jul 2026
Where this leaves you: we found no report of a second suspension after 20 July 2026, and a guide dated 10 October 2026 says MTN lending is active. We found no report that T2 restored the service. We did not read MTN, Airtel, Glo or T2 help pages, so the status lines rest on press and one MTN SMS quoted by Pulse. Dial and read the reply.

Network USSD codes checker: is this string safe to dial?

Paste a code from a message, a forwarded broadcast or a caller. The checker tells you whether it is a harmonised network code, an old one, a bank code, or a pattern that diverts your calls. It never dials anything.

—

Old network USSD codes you will still see forwarded

Guides still list codes that the harmonisation replaced. They are reported by guides, not printed by the NCC, so none has a Copy button here. Pre-2023 codes were one of the reasons the NCC said it wanted a single list.

Pre-2023 codes reported by guides, with their replacements
Old stringWhat guides say it didWho prints it
*556#MTN balance, now *310#naijaknowhow
*555#MTN recharge, now *311#naijaknowhow
*131#MTN data purchase, now *312#naijaknowhow
*606#MTN airtime and data borrowing, now *303#naijaknowhow
*447#MTN stop service, now *305#naijaknowhow
*785#MTN SIM registration check, now *996#naijaknowhow
*140#Airtel balance, now *310#Techuncode
*141#Airtel data subscription, now *312#Techuncode

Our analysis: network USSD codes and the borrow-service gap

The harmonised list is thin. Thirteen services, all bare numbers, and nothing that carries an amount, a PIN or a phone number. Everything with an argument, from *311*PIN# to a transfer string, lives in guides that disagree with each other. Our reading: if a code is not on the NCC’s table, treat the menu it opens as the instruction and ignore the forwarded shortcut.

The 2026 timeline shows a second weakness. A code on the regulator’s list is not a guarantee that the service behind it answers. MTN and Airtel announced the suspension in mid-April, before any court order, and the FCCPC said it had not banned the service. Airtel and Glo came back after about six weeks; MTN took from 17 April to 8 July, nearly twelve weeks, and the FCCPC’s 20 July statement says the rules are enforceable again.

Editor’s judgment: do not build an emergency plan on *303#. Keep a small airtime balance, and keep your bank’s airtime code from our bank pages as a second route. This is editorial opinion, not financial advice.

Dial-this scams around network USSD codes

The same star-and-hash format that makes network codes handy also carries scams. Never dial a string a caller reads out. Call-diversion strings begin with *21*, *61*, *62*, *67* or *004* and send your calls and OTP calls to someone else’s number. None of them is on the NCC’s table. The phone-standard checks *#21# and ##002# show or cancel call forwarding. Read more on the USSD safety page, and the fees page explains what bank sessions cost.

T2 and the older 9mobile name

9mobile began its rebrand to T2 in August 2025, according to Nairametrics and TheCable, after LH Telecommunications bought a controlling stake in 2023. Some blogs still say 9mobile and a few list T2 as a separate set of codes. The NCC list applies to all licensed operators, so the same codes apply to T2 SIMs. T2 is also the network where we found no report of borrowing returning.

Method, sources and limits

We ranked sources the way our editorial policy sets out. The code list rests on the NCC consumer portal (published 7 June 2023, read in full). Borrow timeline: Nairametrics (17 and 22 April 2026), Techpoint and Vanguard (June 2026), BusinessDay (25 May 2026), Pulse (8 July 2026) and Legit.ng (21 July 2026). T2 name: Nairametrics (9 August 2025) and TheCable. Old codes: naijaknowhow and Techuncode, reported only.

Not covered: bundle prices, plan sub-menus, night plans, value-added service codes and any fee we could not find on an operator page. We did not read MTN, Airtel, Glo or T2 help pages. Spot an error? Use the contact page.

Network USSD codes: your questions

What is the USSD code to check airtime balance on MTN, Airtel, Glo and T2?

Dial *310# on any of the four. The NCC’s harmonised list gives one balance code for every network, and its own text uses *310# as the example. Older codes such as *556# on MTN are pre-2023 strings.

What is the code to check data balance on all networks?

*323# is the NCC’s data plan balance code. Guides add that a few older SIMs or modems may still answer an old network code, but the harmonised one is the one to try first.

How do I buy data with a network USSD code?

Dial *312#, which the NCC lists as the data plan code for every network, and pick a bundle from the menu. The menu contents and prices differ by network and change often, so this page does not print them.

What is the code to borrow airtime or data?

*303# is the harmonised borrow code. Whether your network answers it depends on the service being switched on: all four networks suspended lending in April 2026, and the timeline above shows who restored it and when.

Why does *303# not work on my line?

Three common reasons: the network has not restored the service (we found no report for T2), your line is not eligible (Pulse says eligibility rests on recharge and usage history, prepaid lines only), or you still owe a previous loan. Dial the code and read the reply rather than assuming.

How much does it cost to borrow airtime?

Pulse says the borrowed amount is repaid from your next recharge together with the applicable service fee. Several guides put MTN’s fee at 15 per cent, so ₦100 borrowed gives ₦85, but we did not find the figure on a page MTN prints. Treat it as reported only.

Is T2 the same as 9mobile?

Yes. 9mobile began its rebrand to T2 in August 2025, per Nairametrics and TheCable, under owner LH Telecommunications. Some guides still say 9mobile. The same harmonised codes apply to its SIMs.

Why do *556#, *131# and *606# not work any more?

The NCC let old network codes run alongside the new ones until 17 May 2023, then moved every network to the harmonised list. Guides list those three as MTN’s pre-2023 balance, data and borrow codes.

What is *996# for?

The NCC lists 996 for verifying SIM registration and NIN-SIM linkage, and press prints it as *996#. Use it to check your own line, not to send your NIN to anyone.

Are network USSD codes free to dial?

The NCC page does not state a charge, and we did not read an operator page that does, so we do not claim either way. The ₦6.98 session charge on our fees page applies to bank USSD sessions, not to these network codes.

Do network codes work for my bank account?

No. Network codes control your SIM and airtime. Bank codes such as *737# or *901# belong to each bank. Use the all-banks page to find yours.

What do 300, 301 and 302 mean?

The NCC prints 300 as the call centre or help desk, 301 as voice mail deposit and 302 as voice mail retrieval. It prints them without a star or hash, so we show them the same way.

What about DND (2442) and number portability (3232)?

The NCC lists both as harmonised codes and prints them bare. It does not say how to use them, so we do not give steps. Ask your network or the NCC consumer portal.

Can a caller ask me to dial a network code?

Be careful. A caller who tells you to dial a string starting *21*, *61*, *62*, *67* or *004* is asking you to divert your calls. None of those is in the NCC list. Use the checker above or our safety page before you dial anything.